diff options
Diffstat (limited to 'common/console.c')
| -rw-r--r-- | common/console.c | 29 |
1 files changed, 19 insertions, 10 deletions
diff --git a/common/console.c b/common/console.c index bdd24c1..64e5128 100644 --- a/common/console.c +++ b/common/console.c @@ -54,14 +54,23 @@ #define UART_IBRD_VAL 13 #define UART_FBRD_VAL 44 -#define PL011_BASE 0x09000000UL +/* the base comes from the devicetree walk, the qemu default + * only covers the dev path before the walk runs + */ +static uintptr_t pl011_base = 0x09000000UL; + +void tb_console_set_pl011(uintptr_t base) +{ + if (base) + pl011_base = base; +} static int console_uart_ok; static void uart_putc(char c) { - volatile uint32_t *fr = (volatile uint32_t *)(PL011_BASE + UART_FR); - volatile uint32_t *dr = (volatile uint32_t *)(PL011_BASE + UART_DR); + volatile uint32_t *fr = (volatile uint32_t *)(pl011_base + UART_FR); + volatile uint32_t *dr = (volatile uint32_t *)(pl011_base + UART_DR); /* TXFF can happen mid line on slow consoles, wait it out */ while (*fr & UART_FR_TXFF) @@ -77,12 +86,12 @@ static void uart_putc(char c) */ static int uart_init(void) { - volatile uint32_t *cr = (volatile uint32_t *)(PL011_BASE + UART_CR); - volatile uint32_t *ibrd = (volatile uint32_t *)(PL011_BASE + UART_IBRD); - volatile uint32_t *fbrd = (volatile uint32_t *)(PL011_BASE + UART_FBRD); - volatile uint32_t *lcrh = (volatile uint32_t *)(PL011_BASE + UART_LCRH); - volatile uint32_t *imsc = (volatile uint32_t *)(PL011_BASE + UART_IMSC); - volatile uint32_t *icr = (volatile uint32_t *)(PL011_BASE + UART_ICR); + volatile uint32_t *cr = (volatile uint32_t *)(pl011_base + UART_CR); + volatile uint32_t *ibrd = (volatile uint32_t *)(pl011_base + UART_IBRD); + volatile uint32_t *fbrd = (volatile uint32_t *)(pl011_base + UART_FBRD); + volatile uint32_t *lcrh = (volatile uint32_t *)(pl011_base + UART_LCRH); + volatile uint32_t *imsc = (volatile uint32_t *)(pl011_base + UART_IMSC); + volatile uint32_t *icr = (volatile uint32_t *)(pl011_base + UART_ICR); /* disable, mask irq, clear pending, divisors, fifo, enable tx */ *cr = 0; @@ -95,7 +104,7 @@ static int uart_init(void) /* self test write, TXFF clearing means the uart answers */ uart_putc('\0'); - while (*(volatile uint32_t *)(PL011_BASE + UART_FR) & UART_FR_BUSY) + while (*(volatile uint32_t *)(pl011_base + UART_FR) & UART_FR_BUSY) ; return 0; |